PYTHON3® EXHAUST SLIP-ONS
Get the famous Python3® look and performance while still using the stock header pipes
Use the same baffle as the Python3® full systems
Feature an embossed Python3® logo on each muffler
Come complete with all necessary mounting brackets and instructions
Made in the U.S.A.

1801-0255 For 07-08 FLSTF models
1801-0254 For 07-08 FXST/B/C, 07-08 FLSTC, 08 FXCW/C models
1801-0256 For 05-08 FLSTN, 08 FLSTSB
1801-0257 For 91-08 Dyna Glide models (Except 08 FXDF)

SPRING SOLO SEATS
Constructed of high-density, polyurethane molded foam covered with faux leather
Available in small (13-in. L x 10-in. W x 1 3/4-in. H)
Feature a heavy steel, contoured seat base with a black finish
Includes adjustable front seat hinge and two rear mount studs for springs; order springs separately (DS-902011)

Made in the U.S.A.

FOR CUSTOM APPLICATIONS
SMALL SEAT (13-in. L x 10-in. W x 1 3/4-in. H)
0806-0013 Red faux leather
0806-0014 White faux leather
0806-0015 Black faux leather w/ black diamond stitching
0806-0016 Black faux leather w/ black spider web stitching
0806-0017 Black faux leather w/ red spider web stitching
0806-0018 Black faux leather w/ white diamond stitching

NEUTRAL SWITCH COVER
Chrome switch cover offers a clean, custom look
Covers the OEM switch and plug
Installs easily with included hardware

1105-0021 For 06-08 OEM Big Twin 6-speed transmissions

O2 SENSOR COVERS
Chrome O2 sensor covers offer a unique, custom look
Designed to cover the plain OEM sensors
Install easily with included hardware
Sold in pairs

1861-0451 For all OEM O2 sensors

“STICK-STYLE” HANDLEBARS
Steel tubing construction with a beautiful chrome-plated finish
Drilled and dimpled for stock controls
Available in three diameters: 1-in., 1 1/4-in. Buffalo Bar and 1 1/2-in. Big Buffalo Bar styles
1-in. bars accept stock risers and handlebar clamp
1 1/4-in. Buffalo bars are knurled (3 1/2-in. on-center risers) and have the center clamping area sized down to 1-in., designed for use with the 1 1/4-in. Buffalo Risers and Buffalo handlebar clamps (sold separately; see 2008 FatBook pages 676, 679)
1 1/2-in. Big Buffalo Bars require special risers that accept handlebars with a 1 1/2-in. diameter in the clamping area (sold separately; see 2008 FatBook page 679)
Made in the U.S.A.

PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK
0601-0743 1-in. Stick 0-in. 30-in. - 0-in.
0601-0744 1 1/4-in. Buffalo Stick 0-in. 30-in. - 0-in.
0601-0745 1 1/2-in. Big Buffalo Stick 0-in. 30-in. - 0-in.

FRONT TURN SIGNAL RELOCATION KIT
Chrome studs that allow the turn signals to be relocated to the front fork
Installs in place of the top or bottom triple tree pinch bolts

2020-0372 For 06-08 Dyna models

     Feuling® oiling systems include a billet 6061 high volume oil pump, billet 7075 hard anodized camplate, HP +® hydraulic roller lifters and gasket kit. This combination of parts increases oil pressure, oil volume, engine oil flow and return oil scavenging, eliminating wet sumping. The Feuling® system generates cooler oil and engine temperatures resulting in a quieter more powerful engine.

     Test results show a decrease of engine temperatures by +/- 20 degrees, increase in oil pressure and a decrease in engine oil blow by. Results also show an increase of 3 H.P. and 4 Ft. Lbs of T.Q to the rear wheel.

     Race Series kits include a blue printed billet 7075 hard anodized oil pump and full travel hydraulic roller lifters. The Race series lifters are designed with tighter internal tolerances and a slower bleed down rate to handle heavy valve spring pressures. The race lifters also have increased roller clearance for steep ramped camshafts.

#0932-0027 ‘99-‘06 Exc. ‘06 Dyna, HP +® Series–Gear Drive $859.95
#0932-0028 ‘99-‘06 Exc. ‘06 Dyna, Race Series–Gear Drive $1099.95
#0932-0029 ‘06 Dyna and Later Models HP +® Series–Gear & Chain $859.95
#0932-0030 ‘06 Dyna and Later Models Race Series–Gear & Chain $1099.95
#7078 ‘99-‘06 Exc. ‘06 Dyna Chain Drive Conversion Kit for #0932-0027 and #0932-0028

CYCLE VISIONS

BAG LITES
Newly designed Bag Lites are easier to install, have brighter LEDs, come with run/turn/brake controller (which only controls the Bag Lites) that illuminates the turn mode amber and the run and brake function red
Machined from T-6 aluminum with a chrome-plated bezel
LED illuminated for higher visibility and safety
Complete with wiring and quick-disconnect for easy bag removal
Available in two- or four-light kits
Light assemblies are watertight

NOTE: Requires a 1 3/4-in. hole to be drilled in the saddlebag for each light assembly.

NOTE: Not DOT approved.

FOR L99-08 FLT, FLHT, FLHR, FLHX AND FLTR MODELS
0903-0414 Two-light kit w/ wiring
0903-0415 Four-light kit w/ wiring

TECH TRIM
Windshield trim with integrated sequential amber turn signals
Features 16 run/turn LEDs
Simple plug-in application: plugs into stock harness (two holes are needed to install)
Comes with controller
Available with chrome or powder black-coat finish
Patent pending

FOR 96-08 FLHT, FLHX
2040-0419 Chrome
2040-0420 Black

KLOCK WERKS

TIRE HUGGER FRONT FENDER MOUNTING BLOCKS
Less is more in this minimalist part that provides perfect spacing for a Tire Hugger Series fender project
Use with Klock Werks’ front fenders, or they can also be used for a variety of custom applications
Machined from billet aluminum and are available in a chrome or raw finish
Tire Hugger Series FL spacers measure 5/8-in. tall by 3 5/8-in. long and have 3-in. on-center holes; spacers for 21-in. tires are 1-in. wide; spacers for 16-in./18-in. tires are 7/8-in. wide
Tire Hugger Series Softail spacers measure 5/8-in. tall by 3-in. long and have 3-in. on-center holes; spacers for 21-in. tires are 3/8-in. wide; spacers for 16-in./18-in. tires are 1/8-in. wide
All are sold in pairs
Made in the U.S.A.

NOTE: Will not fit Perse front forks.

FOR 84-08 SOFTAIL MODELS (EXCEPT FXCW/FXCWC, FXSTD AND SPRINGERS) AND CUSTOM APPLICATIONS
1410-0033 16-in./18-in. chrome finish
1410-0034 16-in./18-in. raw finish
1410-0031 21-in. chrome finish
1410-0032 21-in. raw finish
FOR 83-08 FLT, FLHT, FLHR, FLTR, FLHX MODELS
1410-0029 16-in./18-in. chrome finish
1410-0030 16-in./18-in. raw finish
1410-0027 21-in. chrome finish
1410-0028 21-in. raw finish

TIRE HUGGER SERIES FRONT FENDERS
Fenders for 16-in./18-in. tires are 6.25-in. outside/6-in. inside width and will accommodate up to a 140/18 series tire in a tire-hugging profile that is still safe
21-in. fenders are 5.875-in. outside/5.875-in. inside width and will fit the current 120/21 series tires on 3.5-in. wide rims
Fenders are thick enough to add rigidity to the front end by acting as a fork brace, yet they can still be cut or shaped for an even more custom appearance
E-coat and the use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work
Fenders are pre-drilled; installation requires use of Klock Werks Tire Hugger Front Fender Mounting Blocks, available separately
Made in the U.S.A.

FOR 84-08 SOFTAIL MODELS (EXCEPT FXSTD AND SPRINGERS) AND CUSTOM APPLICATIONS
16-in./18-in. FRONT WHEELS
1401-0210 Thickster
1401-0214 Uncut
1401-0218 Slicer
1401-0222 Wrapper
1401-0226 Swoop
1401-0230 Tude
1401-0234 Level
21-in. FRONT WHEEL
1401-0211 Thickster
1401-0215 Uncut
1401-0219 Slicer
1401-0223 Wrapper
1401-0227 Swoop
1401-0231 Tude
1401-0235 Level

FOR 83-08 FLT, FLHT, FLHX, FLHR, FLTR MODELS
16-in./18-in. FRONT WHEEL
1401-0212 Thickster
1401-0216 Uncut
1401-0220 Slicer
1401-0224 Wrapper
1401-0228 Swoop
1401-0232 Tude
1401-0236 Level
21-in. FRONT WHEEL
1401-0213 Thickster
1401-0217 Uncut
1401-0221 Slicer
1401-0225 Wrapper
1401-0229 Swoop
1401-0233 Tude
1401-0237 Level

COVINGTONS CYCLE CITY

VELOCITY STACKS
CNC machined and given a brilliant chrome finish
Fit Patrick Racing dual Mikuni 42mm carburetors
<bullet>Sold in pairs

1010-0309 Velocity stacks

HANDLEBAR RISERS
CNC machined from billet aluminum
Bolts through from the top
For use with 1-in. handlebars
Sold in pairs

1.5-in. RISERS
0602-0141 Black
0602-0142 Chrome
3-in. RISERS
0602-0143 Black
0602-0144 Chrome
6-in. RISERS
0602-0145 Black
0602-0146 Chrome

BATTISTINI

BILLET SHIFTER ROD LEVERS
CNC-machined billet aluminum
Contemporary Battistinis styling
Choose from chrome or black finish
Sold each

FOR 86-08 FLT
1602-0167 Chrome
1602-0168 Black

BILLET SHIFTER LINKAGE RODS
CNC-machined billet aluminum construction
Accept stock rod ends
Choose chrome or black finish
9 1/4-in. long

FOR 86-08 FLT
1601-0212 Chrome
1601-0213 Black

BILLET SHIFTER LEVERS
CNC-machined billet aluminum
Contemporary Battistinis styling
Available in single or toe/heel sets
Choose from chrome or black finish
Includes shifter pegs

FOR 86-06 FXST, 93-06 FXDWG
1602-0169 Single, chrome
1602-0170 Single, black
FOR 86-06 FLST, 84-06 FLT/FLHT/FLHR/FLTR
1602-0171 Toe/heel set, chrome
1602-0172 Toe/heel set, black