LOW-PROFILE SEAT WITH DRIVER BACKREST
Solar reflective leather in seating area; automotive-grade vinyl on sides
Molded polyurethane foam for maximum comfort and styling
3/16-inch ABS thermoformed seat base for a perfect fit
Fully carpeted bottom to protect paint
Driver backrest measures 7 1/2-in. H x 10-in. W and has a sewn-in pouch, solar-reflective leather cover, 2-in. forward-to-rearward adjustment, and a vertical adjustment of 2-in.-1/2-in.; all exposed hardware is show-chromed; all internal hardware is zinc-plated to prevent rust
Include instructions and all mounting hardware
Will fit with all Drag Specialties and most Harley-Davidson sissy bars
1/2-in. lower seating position than stock seat
Made in the U.S.A.

<note>NOTE: FLHR/FLHX seats will fit FLT/FLHT/FLTR models when used with lower dash extension PART #DS-720123.

FOR 06-07 FXST, FXSTB, FXSTC, FXSTS, 07 FLSTF (15-in. W FRONT; 12-in. W REAR)
0802-0407 Flame stitching
0802-0408 Mild stitching
FOR 00-05 FXST, 00-07 FLST (EXCEPT FXSTD, FLSTN, 07 FLSTF) (15-in. W FRONT; 12-in. W REAR)
0802-0403 Flame stitching
0802-0404 Mild stitching
FOR 84-99 FXST, FLST (EXCEPT FXSTD, FLSTN) (15-in. W FRONT; 12-in. W REAR)
0802-0405 Flame stitching
0802-0406 Mild stitching

BIG TWIN GEAR OIL
Formulated for Big Twin transmissions that call for hypoid-type gear oils
Promotes easier shifting and quiets the transmission
Extends components’ life by protecting against wear and shock loads
Provides excellent thermal stability over a wide range of temperatures
Features a special blue coloring
Meets and exceeds all manufacturers’ required

3606-0008 80W quart bottle, ea. (sold in case lots of 12)
3606-0009 85W-140 quart bottle, ea. (sold in case lots of 12)

DOT-4 BRAKE FLUID
A universal brake/clutch fluid for all systems requiring DOT-4 fluid
470? dry boiling point

3703-0013 12 oz. ea. (sold in case lots of 12)
3703-0014 12 oz. ea. (sold in case lots of 12)

FUEL INJECTOR CLEANER
Easy-to-use fuel injector cleaner that has been formulated to displace moisture and fuel system deposits
Designed to soften and dissolve existing carbon deposits
Will clean the combustion chamber, piston rings and valves
Absorbs water and other harmful contaminants
Stabilizes and conditions fuel

3704-0059 Fuel injector cleaner 8 fl. oz., ea. (sold in case lots of 12)

FUEL STABILIZER
Designed to prevent fuel breakdown, fuel system corrosion, gum and varnish formulation on carbureted and fuel injected engines
Keeps fuel fresh while storing
Absorbs moisture
Works well with all 2- and 4-stroke engines with or without catalytic converters

3707-0006 Fuel stabilizer 8 fl. oz., ea. (sold in lot cases of 12)

TOP MOTOR MOUNT COIL MOUNT
Fits Drag Specialties top motor mount PART #s DS-243606, DS-243607
Also fits any top motor mount with 2-in. on-center 1/4-in. mount holes
Accepts Dyna end-mount ignition coils, PART #s DC10-1, DC3-1, DC2-1, DC1-1 or DC8-1
Keyhole is machined to fit ignition/starter switch PART # 2106-0016; also fits ignition switch PART # DS-272114
Includes four stainless steel button-head mount bolts with the heads turned down

2102-0129 Chrome
2102-0130 Black

STEALTH I AND II MIRRORS
The original chrome Stealth mirrors are available in clear or “Blue Sapphire” tinted designs
“Blue Sapphire” design looks great and helps reduce glare
The original Stealth I mirror with a 4 3/4-in. stem; works great on most pullback and Ape Hanger bars
The Stealth II same great custom mirror head but has a 6-in. stem–fabulous for drag or custom handlebars
Replacement stems and reflectors are also available separately
Stems fit all Stealth mirror heads plus most OEM and aftermarket OEM-style mirror heads that thread at the mirror head
All feature familiar stud-style mounting common to other mirrors, or we supply chrome socket head Allen bolts for a new style of custom mounting
Oval head measures 5-in. x 2 1/2-in.; right- or left-side installation
Mount on 72-07 Harley clutch or brake lever housings and most custom mounting applications
Mirror head screws and pivots are stainless steel
Sold each

STANDARD
0640-0285 Stealth I black mirror
0640-0286 Stealth II black mirror
“BLUE SAPPHIRE”
0640-0287 Stealth I black mirror
0640-0288 Stealth II black mirror

KLOCK WERKS

WFB SADDLEBAG EXTENSIONS
Use to create the stretched smooth look that Klock Werks baggers are known for
Fiberglass construction with a gel-coat finish
Very easily bonded to any 93-08 factory FL model with hard saddlebags
Wider lip for better adhesion to new plastic saddlebags
Styles available for hidden exhaust, 2-into-1 and true duals
Made in the U.S.A.

3501-0329 Double Cut, for true dual exhaust

CYCLE SHACK

SHOTGUN-STYLE “M” PIPES FOR SOFTAIL
Highly-chromed pipes feature a single-piece design
All pipes have 2 1/2-in. muffler bodies and come with baffles
Accept OEM heat shields
Includes O² sensor bungs for 07-08 models
Made in the U.S.A.

FOR 07-08 FLSTN
1800-0622 Tapered, 1 3/4-in.
1800-0623 Slash-out, 1 3/4-in.
1800-0624 Slash-down, 1 3/4-in.

VANCE & HINES

SLIP-ON MUFFLERS
One-of-a-kind “blue-proof” slash-cut, tapered megaphone design for long-lasting looks
They don’t just look good, they are designed to perform
Slip-on design for easy installation
Dyno-tuned baffles and all mounting hardware included
Made and designed in the U.S.A.

1801-0182 For 95-08 FLT, FLHT, FLHX, FLTR and FLHR models

WHEELDOCK

EZ-UP CENTER STANDS
Raise bike onto center stand while rider is still on bike
Simple to get off stand, too; just place bike in gear and drive away
Load carried entirely on bottom of frame rails
Maintenance free with I-Glide self-lubricating bushing at pivot locations
Mounts to frame with two bolts in less than five minutes with a 3/4-in. wrench
Zinc-plated axle and stainless steel springs
All hardware and illustrated instructions included
No frame or bike modification required
Standard center stand fits the standard height suspensions on 89-08 Harley touring bikes that have the bowtie brace welded between frame rails directly below transmission
-3/4-in. center stand fits Harley-Davidson touring bikes that are lowered in the rear only; for factory-lowered models including the FLHX and FLHRS or any bike that has been lowered with the Harley Profile rear suspension lowering kits
-1-in. center stand fits Harley touring motorcycles that have been lowered in the front and rear; for factory-lowered models including the FLHX and FLHRS and any touring model that has been lowered with the Harley Profile front and rear suspension lowering kits

0510-0081 Standard center stand
0510-0082 -3/4-in. center stand
0810-0083 -1-in. center stand

WIMMER CUSTOM CYCLE

DRAGSTAK INTAKE
CNC billet aluminum construction
Inside cone deflects air for improved performance
4.375-in. overall length; 5-in. diameter mouth
Optional water-repellent cover also available

FOR S & S E/G CARBURETORS
1010-0306 Satin Dragstak
1010-0307 Chrome Dragstak
1011-1041 Optional Dragstak cover

COBRA

TRUE DUALS HEADER SYSTEM
Systems feature individual 1 3/4-in. headpipes for increased exhaust flow
2.5-in. one-piece heat shields provide proportionality and seamless, unbroken flow to traditionally styled V-Twins
Accept Cobra slip-on mufflers or any 95-07 OEM-style mufflers

NOTE: Mufflers not included; must be purchased separately.

1800-0635 For 07-08 FLHT, FLTR, FLHR models
1800-0634 For 95-06 FLT, FLHT, FLTR, FLHR models

CUSTOM CYCLE

SWINGARM CONVERSION RETROFIT KITS
Replaces stock Cleve Bloc style swingarm bushings with spherical bearings
Dramatically changes handling and tracking of Dresser models
Spherical bearings greatly reduce the stiction at the swingarm pivot, which provides a quicker reaction time to harsh road conditions
Negates any lateral and torsional movement in the swingarm

FOR 80-01 FLT/FXR MODELS

1302-0207 Swingarm conversion retrofit kit
1302-0208 Swingarm conversion retrofit kit w/ pivot bolt

49MM TRIPLE TREE CONVERSION KITS
Precision-machined from 6061 T-6 aluminum, polished, then chrome-plated for a show-quality finish
Include triple trees, a fork stem bolt and washer, internal fork stop kit, stem nut cover, axle, disc spacer and all necessary hardware
Headlight mounting bracket must be ordered separately
Made in the U.S.A. by Custom Cycle Engineering

0408-0208 49mm conversion for 92-99 Dyna Glide
0408-0209 49mm conversion for 00-03 Dyna Glide
0408-0210 49mm conversion for 04-05 Dyna Glide
0408-0211 49mm conversion for 88-94 FXR, 88-99 XL
0408-0212 49mm conversion for 00-03 XL