DASH/SPEEDOMETER HOUSING
Die-cast, chrome-plated construction
Housing only; does not include speedometer, lights or switch

2201-0052–For 00-07 Softail models (except FXSTD; repl. OEM #71248-00/71250-00)
2201-0053–For 96-99 Softail models (Repl. OEM #71254-96)

CHROME PASSENGER FOOTPEG MOUNT KIT
Used for mounting passenger footpegs or replacing existing OEM footpeg mounts <bullet>Includes mounting hardware
Accepts most male mount pegs
Sold in pairs

1620-0363–For 04-07 XL models; repl. OEM #49322-04

GAS CAPS WITH PAINT PROTECTORS
Chromed low-profile gas caps feature screw-in paint protectors and ratchet-action cap
Available in vented, non-vented and dummy styles
Vented cap has right-hand threads and can be used in either the right side of double-capped tanks or in single-cap tanks
Non-vented cap has left-hand threads and is used only in the left side of double-capped tanks
The dummy cap replaces the OEM fuel gauge in tanks that feature the fuel gauge in the left side; does not feature a fuel gauge
Sold each; comes complete with installation tool for paint protector

0703-0199–Vented, RH thread
0703-0200–Non-vented, LH thread
0703-0201–Dummy style, repl. fuel gauge

FLUSH HANDLEBAR RISER BUSHING KIT
Kit includes bushings, spacers and bolts to install your handlebars
Features countersunk lower washers for a true custom look
Available in 1/2-in.-13 threaded application

0602-0113–Flush riser bushing kit

FORWARD CONTROL KITS
Chrome-plated steel forward controls
Replaces OEM forward controls or converts from mid-controls
Includes rubber insert footpegs, shift peg and mounting hardware; uses stock brake master cylinder
See the 2007 FatBook for additional applications

NOTE: Not for use with 2-1 exhaust systems.

1622-0140–For 06-07 XL, standard position
1622-0141–For 06-07 XL, 2-in. extended

LOWERING KITS
All kits are CNC-machined from 6061 billet aluminum
Black anodized finish
Come complete with all necessary mounting hardware and instructions

NOTE: 95-99 Dyna models may require spacers on the right side to clear the rear brake caliper.

1304-0150–For 95-05 Dyna Glide, 1.5-in. lower than stock
1304-0151–For 06-07 Dyna Glide, 1-in. lower than stock
1304-0152–For 02-07 FLHT, FLHR, FLTR, 1-in. lower than stock
1304-0153–For 06-07 XL, 1-in. lower than stock

CHROME PUSHROD TUBE KIT
Kit includes upper and lower tubes, clips, cups, seals, springs, washers and O-rings
Upper and lower tube lengths modified to allow use of adjustable push rods
One kit will do a complete engine

0928-0016–For 99-07 Twin Cam

5 3/4-in. DIE-CAST HEADLIGHT ASSEMBLY
Die-cast aluminum housing
Features an H-3 style bulb
Available in matte black or raw
Housing dimensions are 6-in. diameter and 6 1/2-in. deep
Requires a 3/4-in. mounting block (not included)

2001-0207–Matte black headlight
2001-0208–Raw headlight
2001-0209–Repl. Chrome headlight bezel

DELISLE SEAT KITS
Available in air and spring design
Air kit is fully adjustable at the touch of a button, from no air to as hard or soft as you like; includes everything needed for easy installation: steel seat pan, compressor, mounts, brackets, switch, line, fittings and hardware, etc.
Spring seat kit includes seat pan, springs, brackets and hardware

FOR CUSTOM APPLICATIONS
0806-0025–Air Seat Kit
0806-0026–Spring Seat Kit

MULTIBAR
Each bar is made from a single piece of 1 1/4-in. tubing that’s gloss black powder-coated
Patent-pending design with built-in bonded rubber footrests that provide traction and allow riders to adjust their position
Easily installed with included hardware

1624-0109–For 00-07 FLSTS, FXST, FXSTS and FXSTD models
1624-0108–For 91-07 FXD w/ mid-mount controls
1624-0107–For 97-07 FLHT, FLHX and FLHR models

KLOCKWERKS

FRENCHIE LICENSE PLATE FRAMES
Billet aluminum in either chrome or raw versions
Lighted style illuminates plate and adds an extra polished look to the back of bike
Bolt directly to Klock Werks Stretched Rear Fender, PART #1401-0193, for 97-07 FLT, FLHT, FLHX, FLHR and FLTR models or may be used in custom applications
Easy to install, includes mounting hardware
Accepts most 4-in. x 7-in. license plates
Made in the U.S.A.

2030-0229–Chrome lighted frame
2030-0231–Chrome frame
2030-0230–Raw frame

WIMMER CUSTOM CYCLE

90? SUPER-SUCKER INTAKE
CNC-machined with a chrome finish
Features an integrated support bracket and breather system
Patented washable breather filter included
Stack system measures 4 1/2-in. L with a 4-in. diameter
Mikuni adapter converts Wimmer Super-Sucker intakes for 99-06 88-in. Twin Cam with CV/Delphi EFI carbs to fit 99-06 88-in. Twin Cam with HSR Mikuni carbs
Made in the U.S.A.

1010-0203–For S&S E and G series, S&S 111-in./117-in./124-in. motors

JIM NASI CUSTOMS

CHROME 250MM BILLET SWINGARMS
Lowlife swingarm is a bolt-in replacement for the standard swingarm used on Lowlife frames
Features radical 3-D styling
Low-Cut and Blade swingarms give a new look to your Daytec, Big Dog or American Iron Horse Softail frame
Require use of .800-in. offset kit PART #1120-0024 (sold separately)

0503-0032–Lowlife swingarm for Lowlife frames

CUSTOM CYCLE/DEW MFG.

SWINGARM CONVERSION RETROFIT KITS
Replaces stock Cleve Bloc style swingarm bushings with spherical bearings
Dramatically changes handling and tracking of Dresser models
Spherical bearings greatly reduce the stiction at the swingarm pivot, which provides a quicker reaction time to harsh road conditions
Negates any lateral and torsional movement in the swingarm

1302-0207–Swingarm conversion retrofit kit
1302-0208–Swingarm conversion retrofit kit w/ pivot bolt

KHROMEWERKS

3-in. HP-PLUS® SLIP-ON MUFFLERS
Patented steel construction baffle now features more high-temperature fiberglass packing, provides significant gains in horsepower and torque and exhibits a distinctive, throaty sound
Use all factory mounting hardware
Sold in pairs and available in slash-cut or tapered style
OEM heat shields may be retained
Made in the U.S.A.
U.S. patent 5,173,576

NOTE: ECM units on fuel-injected models need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly.

NOTE: These mufflers are designed for use on close-course competition motorcycles only and do not conform to U.S. EPA noise emission standards.

FOR 07 FXST/FLST MODELS (EXCEPT FXSTD/FLSTF/FLSTN)
1801-0148–Slash-cut
1801-0156–Tapered
FOR 07 FXSTD/FLSTF
1801-0150–Slash-cut
1801-0158–Tapered
FOR 07 FLSTN
1801-0152–Slash-cut
1801-0160–Tapered
FOR 05-06 FLSTN
1801-0151–Slash-cut
1801-0159–Tapered
FOR 00-06 FXST/C/S, FLST/C (WITH CROSSOVER CONNECTION)
1801-0147–Slash-cut
1801-0155–Tapered
FOR 00-06 FLSTF/FXSTD (WITH CROSSOVER CONNECTION)
1801-0149–Slash-cut
1801-0157–Tapered
FOR 95-07 FXD
1801-0145 {1}–Slash-cut
1801-0153 {1}–Tapered
FOR 04-07 XL MODELS (WITH CROSSOVER CONNECTION)
1801-0146–Slash-cut down
1801-0154–Tapered

{1} Will fit 91-04 models if mounting bracket DS-209936 is used.