he Hypercharger has always been popular and Küryakyn has just made a good thing better. With Mike Roland’s testing and development the new Pro-R is the best flowing Hypercharger Küryakyn’s ever offered. It’s part of the “Wild Things Performance Products” line and inside and out, especially around those critical radii leading into the carb or throttle body, it’s all been carefully re-designed. A new outer cover incorporates an additional scoop to better direct air into a high-flow, washable foam filter element that’s set in the end of a round K&N filter element. This combination filter is one of the best flowing on the market, capable of supplying plenty of air to even the highest-output street motors. The Pro-R’s intake opening is huge and the vacuum-operated butterflies allow almost unrestricted airflow. The Pro-R Hypercharger comes complete with all mounting hardware and a crankcase breather kit. It’s Drag Specialties Part Number 1010-0216.



ere’s more performance. Unlike some aftermarket cams that trade low-end power and torque for top-end horsepower, or swap that top-end performance for low-end torque, the new Küryakyn Wild Things Cams are custom ground to deliver a wide and ultra-useable powerband. There’s a strong low-end here with plenty of torque and plenty of top-end horsepower with an extended RPM range. The Küryakyn cams run quietly and extend the life of the entire valvetrain life, too. The Wild Things Cams are a direct bolt-in for 88- to 95-inch motors and the power gains are impressive all the way up to a 6,500 RPM redline. 90-plus horsepower is more than possible in an 88-incher with no head work. It’s Drag Specialties Part Number 0925-0101.



kulls are in and Küryakyn’s skeletal pegs not only look the part they’re plenty tough. That ominous skull is right there, too, nestled between the rubber pads with a sinister spire point filling the void. Complete the look with Küryakyn’s Skull Air Cleaner. The Zombie Pegs carry Drag Specialties Part Number 1620-0277.



here’s nothing pretty about the roughly forged frame neck on a Twin Cam Softail but Küryakyn’s taken care of that. Two screws and a couple minutes time puts this smooth and cleanly contoured set of stamped steel neck covers on any Softail equipped with fork tins (Heritage, Fat Boys, etc.). There’s a second version available for the Deuce. These chromed covers not only mask that ugly neck forging they cover the wiring and cables. The entire neck area gets a finished look. It’s Drag Specialties Part Number 0504-0029.



Go touring in style with Küryakyn. The Grantour Bag is a great solution for overnight trips. It can be sissy bar mounted, fit on a luggage rack or a passenger seat - this is one versatile bag. There’s plenty of packing room, too. The Grantour Bag measures 18-in. tall x 14-in. deep x 20-in. wide and a semi-rigid internal framework keeps the main compartment in shape empty or full. It doubles as an adjustable lumbar support, too. Extra-large zipper pulls are glove-friendly, there’s a retractable locking device to keep the bag right where you put it, it’s made with durable Cordura and leather, it’s weather-resistant and even comes with a rain cover. The Drag Specialties Part Number here is 3503-0012.