SPRING SOLO SEATS
Constructed of high-density polyurethane molded foam covered with leather or faux leather
Available in large (14” L x 13” W x 2” H) or small (13” L x 10” W x 1 3/4” H)
Feature a heavy steel contoured seat base with a powder-coat finish
Includes adjustable chrome front seat hinge and two rear mount studs for springs; order springs separately (DS-902011)
For custom applications
Made in the U.S.A

SMALL SEAT (13” L x 10” W x 1 3/4” H)
0806-0007*Black faux leather
0806-0008*Tan leather
0806-0009*Black (cross red flame) faux leather
0806-0010*Black (cross black flame) faux leather
LARGE SEAT (14” L x 13” W x 2” H)
0806-0005*Black faux leather
0806-0006*Tan leather
0806-0011*Black (cross red flame) faux leather
0806-0012*Black (cross black flame) faux leather

TOUR-PAK® LENS KITS
Replace the stock red lens
Kit includes eight red bulbs and all necessary mounting hardware
Not for use on 06-07 King Tour-Pak®

2040-0303*Clear lens kit
2040-0304*Smoke lens kit

PORK CHOP FAIRING MIRRORS FOR FLHT
Chrome die-cast mirrors bolt to the inner fairing
Contour complements the fairing style
Includes all necessary mounting hardware
Requires four 3/16” mounting holes be drilled into the fairing
Sold in pairs

0640-0191*For 96-07 FLHT models

SLIP-ON MUFFLERS FOR 04-07 XL
3” diameter chrome-plated mufflers
Features a steel baffle that is wrapped with a special insulating blanket for less “crackle” in the exhaust tone
Available in slash-out or slash-down styles
Sold in pairs
Made in the U.S.A.

1801-0121*Slash-out style exhaust
1801-0122*Slash-down style exhaust

OVAL PADS FOR SQUARE SISSY BARS
Fit Drag Specialties square sissy bars and most H-D accessory square sissy bars with a 4” i.d. (except bars with welded inserts)
Feature high-grade, weather-resistant black vinyl covering
Measure 7 1/2” tall x 10 1/2” wide x 2 1/4” thick
Mounting hardware included
Made in the U.S.A.

0822-0058*Pillow style pad
0822-0059*Pillow w/ studs style pad
0822-0057*Smooth style pad
0822-0056*Smooth w/ studs style pad

SHOCK ABSORBERS
Shock bodies are steel construction with multi-stage velocity, nitrogen gas-charged dampers
Feature progressive rate springs that provide a softer initial response, but resist bottoming better than stock springs
Improved damping rates for a more controlled ride with no wallowing
Adjustable spring pre-load
Chrome-plated covers and springs for style
Custom lengths available for stock ride height or a lowered, custom look
Manufactured to Drag Specialties specifications by Progressive Suspension
Sold in pairs
Made in the U.S.A.

1310-0227*11” long shock absorbers for 82-94 FXR, For 79-07 XL, 77-78 XLCR and 83-84 XR 1000

“BOB” RETRO-STYLE AIR CLEANER
Retro-style chrome-plated air cleaner measures 5 1/2” in diameter
Has a re-useable foam filter element
All necessary mounting hardware included
Replacement filter element available separately
Requires appropriate carb support bracket

1010-0191*For CV and Delphi fuel-injected applications
1010-0192*For S&S E and G series carburetors

REPLACEMENT FLYWHEEL ASSEMBLIES
Flywheel assemblies are designed for use with Timken®-style sprocket shaft bearings
Fit directly in stock crankcases with no modifications
For 88”, 95” and 100” displacement in Twin Cam A and B motors; 4” stroke

0921-0035*For 99-02 Twin Cam “A” motor
0921-0036*For 00-02 Twin Cam “B” motor

THUNDERJET® EFI THROTTLE BODIES, MANIFOLDS AND AIR CLEANERS
Replaces the OEM throttle body and manifold
Throttle bodies accept the OEM stock components, including injectors
Matching manifolds are available separately for various cylinder lengths
High-flow air cleaner assembly is also required (sold separately)

FOR 06-07 DELPHI-EQUIPPED TWIN CAM
1022-0037*54mm throttle body/manifold assembly
1022-0038*60mm throttle body/manifold assembly
AIR CLEANER ASSEMBLIES FOR ALL THUNDERMAX EFI THROTTLE
1010-0015*Accepts 8” round Evolution-style cover (cover not included)
1010-0268*Accepts OEM Twin Cam “football” cover (cover not included)

WIMMER CUSTOM CYCLES

90? SUPER-SUCKER INTAKE
CNC-machined with a chrome finish
Features an integrated support bracket and breather system
Patented washable breather filter included
Stack system measures 4 1/2” L with a 4” diameter
Mikuni adapter converts Wimmer Super-Sucker intakes for 99-06 88” Twin Cam with CV/Delphi EFI carbs to fit 99-06 88” Twin Cam with HSR Mikuni carbs
Made in the U.S.A.

1010-0203*For S&S E and G series, S&S 111”/117”/124” motors

FUELING OIL PUMP CORPORATION

HI VOLUME OIL PUMP
Stock replacement oil pump increases oil pressure
Gain 20% pressure volume and 30% scavenge volume over stock oil pump
Eliminates blow-by, wet sumping and oily air cleaners
Provides cooler oil temperatures, more horsepower and more torque

0932-0023*For 06 Dyna, all 07 Twin Cam models

CHOPPER GUYS

FAT GUY 200MM TIRE BAGGER FRAME KIT
Run 200mm tire on all bagger models
CNC-machined, laser and formed components
Features a 30? rake
1” extended, billet steel swingarm
Lowered 1” to provide a lower center of gravity to weight ratio
Symmetrically widened for balance
Accepts stock or custom motor, transmission, front end assembly and gas tank
Transmission not included

0501-0050*200mm tire bagger frame kit

CUSTOM VALLEY

200MM WIDE DRIVE KIT FOR FXR
With these kits you can install a 200mm tire using a 1 1/8” rear belt and still keep everything in the center of the bike
Kits include swingarm, 1” axle, billet aluminum primary spacer with hardware, all necessary transmission parts, shaft extension for compensating sprocket, starter with hardware and detailed instructions
Will require the use of a custom wide rear fender (sold separately)

0503-0043*For 90-94 FXR

HARD KROME

S-2 EXHAUST FOR 86-06 SOFTAIL
2 1/2” staggered straights
Includes CNC-machined billet end caps
Feature patented True Doublewall Construction; U.S. Patent # 6,908,980,
Doublewall construction includes a 1 3/4” inner pipe which holds most of the heat generated from the exhaust and a full-length large-diameter outer pipe which acts as a heat shield

1800-0480*S-2 exhaust with chrome finish
1800-0481*S-2 exhaust with black ceramic-coat finish

INDEPENDENT CYCLE

L2 AND L8 AIR SUSPENSION SYSTEMS
Features exclusive Kevlar® Air Spring technology
Best ride quality; offers no bottoming out under any load condition
Hydraulic dampening valved to offer a smooth ride
CNC-machined 6061 T6 billet aluminum
NEW color-coded plug and play wiring for quick and easy installation
Installs in stock location; no modifications necessary
Includes universal micro toggle switch, on-board air compressor, solenoid valve and all necessary hardware
Performance and quality proven under extensive testing
Made in the U.S.A.

FOR 00-07 SOFTAILS (L2)
1311-0063*Machined finish
1311-0064*Black finish
1311-0065*Chrome finish
FOR 89-99 SOFTAILS (L8)
1311-0066*Machined finish
1311-0067*Black finish
1311-0068*Chrome finish

SAMSON EXHAUST

CALIBER RAY PRICE LIMITED EDITION COLLECTOR SERIES
Inspired by the Samson Ray Price Nitro Harley Race Team
All the performance of Caliber’s 2-into-1 system with a high-tech collector and an in-demand, black-out look
Boost torque and horsepower by 30-35% when properly tuned
Feature the unique four-step header design that starts at 1 3/4” at the port, steps to 1 7/8”, then 2” and finishes off in a 3” muffler body
Black-out, full-coverage heat shields offer a distinct look
High-tech collector features an expansion chamber which allows kinetic energy from engine pulses to dissipate
Include Ray Price signature-engraved chrome billet end cap and two sets of patented Varitech baffles (1 3/4” and 2” i.d.)
Mounting hardware and instructions are included for easy installation

1800-0381*For 86-06 Softail
1800-0380*For 91-05 Dyna
1800-0384*For 95-06 FLT, FLHT, FLTR and FLHR
1800-0383*For 04-06 XL
1800-0382*For 86-03 XL

K&N

K&N’S COMPLETE INTAKE ASSEMBLY FOR TWIN CAM
HARLEY-DAVIDSONS – RK-3910
Get More Horsepower from your Twin-Cam Harley-Davidson ®

Developed around an oversized Original K&N High-Flow Air Filter
Powder-coated billet aluminum backing plate
Built-in dyno-tuned velocity stack and internal run breathers
To be used with OE air cleaner cover to maintain factory look

K&N LIFETIME REPLACEMENT HIGH-FLOW FILTERS – HD-0800
Tired of replacing filters in your Screamin’ Eagle? K&N’s Replacement
Element for Harley Davidson ® Twin-Cam Screamin’ Eagle assemblies lasts a lifetime.

High-Flow Technology for your Harley-Davidson
Pre-oiled premium cotton gauze improves filtering efficiency
Epoxy Coated aluminum wire mesh protects filter media
Accordion design provides increased filtration area over non-pleated filters
Washable and re-usable, Million Mile Warranty

K&N WRENCH-OFF OIL FILTERS – KN-171C/KN-171
The World’s Best Air Filter Company doesn’t stop at just filtering the air that your
engine breathes. K&N’s Oil Filters provide High-Flow rates, outstanding filtration,
and a Synthetic Media that is compatible with modern synthetic oils.

17mm nut for easy installation and removal
Modern synthetic media allows for High-Flow rates
Thick wall construction and strong inner core
Heavy-duty base plate with double-rolled seal
Check valve prevents dry starts and oil drain-back

AIR-FUEL RATIO MONITORS – 85-2437
K&N’s Rectangle “Surface-mount” Complete Kit includes monitor, sensor and weld-on fittings.

A precision instrument designed to Calibrate optimum air/fuel mixtures
Displays in clear LED lighting for added visibility
Allows tuning for maximum performance or optimum fuel economy
Aids performance enthusiasts cure jetting issues
Installation requires minor welding
Ideal for Carbureted, Injected, Supercharged, or Turbocharged engines, using Unleaded Gasoline, Alcohol, Propane or Nitrous Oxide (NOT for use with Nitromethane or Diesel Fuels)