HANDLEBAR CONTROL KITS FOR 04-06 XL
Cool chrome handlebar control kits
Versions for single- and dual-disc brake systems
Aluminum construction with a deep chrome finish
Use OEM switches or equivalent (not included)
Replacement parts also available separately; see the FatBook

0610-0059* 9/16” bore dual-disc brake handlebar control kit
0610-0060*1/2” bore single-disc brake handlebar control kit

CHROME PRIMARY COVER FOR 04-06 XL
Die-cast aluminum primary cover
Polished with a deep chrome finish

1107-0105*Chrome primary cover for 04-06 XL

CHROME INSPECTION COVER FOR 04-06 XL
Machined from billet aluminum
Polished with a deep chrome finish

1107-0106*Inspection cover for 04-06 XL

MINI MECHANICAL SPEEDOMETER WITH DIGITAL ODOMETER
Features a stainless steel, water-resistant housing
Measure just 2.4” in diameter, fits all Drag Specialties mini gauge mounts
Gauge is backlit with long-lasting LEDs
Accepts speedometer cables with 12mm nut
Mode reset switch allows you to change between odometer and re-settable trip meter
Available in three ratios with black- or white-face gauge
Matching tachometers sold separately

WHITE FACE
2210-0045*1:1 ratio
2210-0046*2:1 ratio
2210-0047*2240:60 ratio
BLACK FACE
2210-0048*1:1 ratio
2210-0049*2:1 ratio
2210-0050*2240:60 ratio

MINI GAUGE MOUNT
For use with Drag Specialties 2.375”/2.4” electronic mini gauges
Mounts to standard 3 1/2” center-to-center risers
CNC-machined with a chrome finish
Sold each

2210-0059*Mini gauge mount

SILVER BULLET™ MUFFLERS
3” diameter one-piece mufflers feature Power Chamber design with free-flowing, non-removable baffles with PowerBar technology and high-quality chrome plating
Bolt to the stock locations with supplied hardware
Made in the U.S.A.; sold in pairs

1801-0103*32” Longtail mufflers for 95-06 FLT, FLHT, FLTR and FLHR

SUPERTRAPP

MEAN MOTHERS™ DRAG PIPES
SuperTrapp’s Mean Mothers are now meaner and more powerful
A true stepped-performance pipe that posts impressive performance gains on stock or built engines
A host of features: pre-installed, easy-to-remove baffles, sturdy and simple bracket system with fewer hardware pieces and pre-installed heat shields with OEM fasteners
OEM fasteners on heat shields can be “broken” to replace just the heat shield if necessary
Standard end cap included–great stock appearance
Optional slash-cut and turnout end caps available separately; see the FatBook

1800-0248*Staggered-style for 86-06 Softail

SADDLEMEN

STALLION BAG
All-purpose duffle bag
Nylon construction with synthetic leather side trim
Rigid bottom features retractable handle and roller wheels
Features four large zippered external pockets and bungee net
Pull-out zippered inner bag provides extra storage
Top carry handle and shoulder strap also included
Mounting system easily attaches Stallion Bag to sissy bar or luggage racks
Dimensions: 13” x 21 1/2” x 12 1/2”

3515-0051*Stallion bag

GALINDO DESIGNS

OMEGA BAR END MIRROR MOUNT SYSTEMS
Relocate your mirrors to the ends of your handlebars for improved rearview visibility
Mirror mounts are CNC-machined billet aluminum with a chrome finishing that includes stainless steel hardware
Systems include mirror mounts with hardware, bar ends, textured rubber, bore-thru grips with throttle sleeve and bolt kit for stock turn signals
Mirrors not included, reuses OEM mirrors, or custom mirrors
Bore-through grips are available separately for use with mirror mount system; see the FatBook
For all 82-06 models (except those with air-assisted forks)

0634-0074*Dual mirror system
0634-0075*Single mirror system

BURLY

BURLY BARS
1 1/4” chrome steel bars feature a new tapered technology in the hand control area allowing the customer the freedom to use OEM or aftermarket controls (including hydraulic clutch controls)
Dimpled and drilled for internal wiring
Knurled center
Made in the U.S.A.

0601-0529*Gorilla bar (36.5” wide, 18” rise, 14” center width and 10” pullback)
0601-0528*Gorilla bar (36.25” wide, 20” rise, 14” center width and 10” pullback)

GMA ENGINEERING

MILLENIUM SERIES 4-PISTON CALIPERS
6061 T-6S aluminum construction with a smooth design
Available in an anodized or chrome finish
Replacement brake pads sold separately, see the FatBook
Made in the U.S.A.

1701-0089*Anodized rear caliper
1701-0090*Chrome rear caliper

CUSTOM CYCLE

49MM TRIPLE TREE CONVERSION KITS
Precision-machined from 6061 T-6 aluminum, polished, then chrome-plated for a show-quality finish
Include triple trees, a fork stem bolt and washer, internal fork stop kit, stem nut cover, axle, disc spacer and all necessary hardware
Headlight mounting bracket must be ordered separately
Made in the U.S.A. by Custom Cycle Engineering

0408-0208*For 92-99 Dyna Glide
0408-0209*For 00-03 Dyna Glide
0408-0210*For 04-05 Dyna Glide
0408-0211*For 88-94 FXR, 88-99 XL
0408-0212*For 00-03 XL

JIMS MACHINING

TRANSMISSION DOOR PULLER
Removes transmission door with gears and shaft attached
Puller will not damage door bearings
Made in the U.S.A.

3802-0028*For 06-07 Dyna models and all 07 Twin Cam models

INNER CAM BEARING INSTALLATION TOOL
Used to install inner cam needle bearings
Aligns the bearings with the bores so that you get a perfectly-aligned installation
Sets bearing depth to .023” to .028” below the case surface
A must for the longest bearing and cam life

3801-0064*For 06-07 Dyna models and all 07 Twin Cam models

INNER CAM BEARING REMOVAL TOOL
Used to remove inner cam bearing without damaging the crankcase
Tool is also designed to keep rollers from falling into the crankcase
Comes with instructions
Made in the U.S.A.

3801-0061*For 06-07 Dyna models and all 07 Twin Cam models

VALVE SPRING COMPRESSOR
Used to remove and replace valve and new-style conical valve spring
Requires the use of tool DS-196013 (valve spring compression tool)

3801-0065*For 05-07 Big Twin models (except SE models) and 04-07 XL and Buell

DANNY GRAY

BUTTCRACK™ SOLO
The name says it all
Designed to fit the contours of a rider’s body, this seat cups them into the saddle for a true custom feel
The carved leg passage allows for unobstructed movement
The one-piece all-leather cover wraps the complete seat

FOR 00-06 FXSTD DEUCE
0805-0044*Plain smooth
0805-0045*Flame stitch
0805-0047*Double-time stitch
FOR 00-05 FXST, 00-06 FLST (EXCEPT FXSTD, FLSTN)
0802-0261*Plain smooth
0802-0263*Flame stitch
0802-0265*Venom stitch
0802-0267*Double-time stitch
FOR 84-99 FXST, FLST
0802-0262*Plain smooth
0802-0264*Flame stitch
0802-0268*Venom stitch
0802-0268*Double-time stitch