RADIUS T-BARS
All-new design handlebar is a smooth, clean stretch of steel rather than welded sections
Chrome-plated finish for a custom look
Custom bends for the ultimate in comfort
Drilled and dimpled to accept stock controls
Made in the U.S.A.

0601-0471*6” radius T-Bar
0601-0473*8” radius T-Bar

COMPRESSION RELEASE CAPS
Chrome cap covers the plain plastic end on many aftermarket compression releases
Billet aluminum construction
Install with silicone adhesive (not included)
Sold in pairs

0950-0101*Compression release caps

UNIVERSAL HALF-HELMET SHIELD
Adds the versatility of a face shield to half helmets
Fits most half-helmets, including Z1R, AFX, AGV, MDS, HJC and KBC equipped with a small visor with screws on the sides and a pin, screw or snap in the middle position
Will not work on helmets with a three-snap configuration
Premium optical-grade shatter-resistant polycarbonate construction
Scratch-resistant exterior hard-coating
DOT certified

0131-0048*Universal half-helmet shield

POWER CLUTCH
The original Müller Power Clutch
Replaces OEM inner and outer ramp assemblies
40% easier clutch lever operation
Easy to install; no drilling or spacers needed
Made in Germany
U.S. Patent #6,889,810

1130-0045*Power Clutch for Baker right-side drive transmissions with mechanical clutch release

CHROME BILLET MIRRORS
CNC-machined billet aluminum body with a show chrome finish
High-quality glass
Oval mirror heads measure 4 1/4” W x 3” H; teardrop mirror heads measure
3 1/4” W x 3” H; stems measure 6” L
Includes removable mounting studs
Designed to fit one inch farther out than standard mirrors for better sight lines
Sold each

0640-0143*Oval stepped, left
0640-0144*Oval stepped, right
0640-0145*Oval smooth, left
0640-0146*Oval smooth, right
0640-0147*Teardrop stepped, left
0640-0148*Teardrop stepped, right
0640-0149*Teardrop smooth, left
0640-0150*Teardrop smooth, right

SHIFT LINKAGE EXTENSIONS
Polished stainless steel construction
Fits OEM and custom linkages with 5/16” -24 threaded ends
Available in four lengths; sold each

1601-0125*1” extension
1601-0126*2” extension
1601-0127*3” extension
1601-0128*4” extension

STAINLESS STEEL SHIFT LINKAGE
Simple 2-bolt mounting design
Includes linkage and a stainless steel transmission lever cover that can be installed in minutes without removing the transmission lever itself
Linkage can be adjusted up to 1”
Measurements are eye center to eye center with linkages fully collapsed
Made in the U.S.A.

1601-0129* 12 1/8” shift linkage for ‘86-‘06 FLT and ‘86-‘06 Softail (except ‘97-‘99 FLSTS), full flame design

REAR ADJUSTABLE LOWERING KITS
Reduces height as much as two inches
Once installed, look and feel of the bike can be customized to rider’s preference
Made in the U.S.A.

1304-0075*For ‘89-‘99 Softail models
1304-0076*For ‘00-‘06 Softail models

BRAIDED STAINLESS AND COPPER HOSES
25’ rolls of braided stainless steel or braided copper hoses for various OEM and custom applications

BRAIDED STAINLESS STEEL HOSES
0711-0104*1/4” i.d.
0711-0105*5/16” i.d.
0711-0106*3/8” i.d.
BRAIDED COPPER HOSES
0711-0107*1/4” i.d.
0711-0108*5/16” i.d.
0711-0109*3/8” i.d.

BRAIDED STAINLESS AND COPPER COVERS
25’ rolls of stainless steel or copper covers without clear PVC covering for various OEM and custom applications

2120-0069*1/2” i.d. copper
2120-0073*3/4” i.d. stainless steel

CLEAR SHRINK TUBING
Used to cover cables and wiring
Protects paint and chrome
Sold in 25’ rolls

2120-0070* 3/4” i.d. clear shrink tubing

JARDINE

PASSENGER BACKRESTS AND MOUNTING KITS
Only the bracket kits are bike-specific in this inventory-friendly system
Backrest is constructed of billet steel with a chrome finish
Feature detachable docking hardware for easy installation or removal; no tools needed
Choice of short (11 1/2” mounted height) or tall (15 1/2” mounted height) universal billet backrest; short backrest also available in wide pad version with swivel action
Backrest has smooth black vinyl covering
Order one mounting kit and one backrest

BACKRESTS
BR-0001-01*Tall backrest w/ standard pad
BR-0002-01*Short backrest w/ standard pad
1501-0083*Short backrest w/ wide pad
MOUNTING KITS
1501-0081*For ‘06 Dyna models
1501-0082*For ‘00-‘05 FXST (except FXSTD), ‘00-‘06 FLST
1501-0080*For ‘04-‘06 XL models

COMETIC

AFM SERIES PRIMARY GASKET, SEAL AND O-RING KITS
Aluminum Foamette Material (AFM) gaskets feature an aluminum core with a chemically blown, compounded nitrile synthetic rubber bonded to the outside
Gaskets have resistance to temperatures of more than 2500?F
Have an 85% shape-recovering while maintaining strong torque retention–ideal gasket material for machined surfaces
Does not require gasket sealer
Kits include all gaskets, seals and O-rings required for both the inner and outer primary
Made in the U.S.A.

0934-0743*For ‘94-‘06 Softail, ‘94-‘05 Dyna Glide
0934-0742*For ‘89-‘93 Softail, Dyna Glide
0934-0745*For ‘94-‘06 FLT, FLHT, FXR
0934-0744*For ‘80-‘93 FLT, FLHT, FXR
0934-0746*For ‘65-‘88 Softail, FX, FL 4-speed