CUSTOM FRAME SIDE PANELS FOR 97-06 FLT, FLHT, FLTR AND FLHR MODELS
Panels add a "full-bodied" look to the sides of the bike
Replace OEM side covers and fill-in around the front of the saddlebags
Provide a great area to continue the paint scheme
Panels are available with a cutout to fit with the OEM passenger floorboards and mounts or smooth for use with no passenger floorboards or pegs
Made from paintable formed ABS plastic; easy to trim or form if needed
Must be used in conjunction with Carlini floater bars (DS-209951) or the H-D OEM saddlebag support kit #(46565-04) (purchased separately)
Requires drilling and tapping the frame
Made in the U.S.A.

0504-0023*Panels for OEM passenger floorboards (pr.)
0504-0024*Panels for use w/o passenger floorboards or pegs (pr.)

FRONT FRAME COVER
Fits around and covers front frame tubes and lower mounts
Cleans up front area of the frame
Made of formed ABS paintable plastic
Supplied with instructions and hardware
Requires drilling and tapping the frame
Made in the U.S.A.

0504-0022*For 97-06 FLT, FLHT, FLT and FLHR models

AIR FILTER CLEANER
Quick and safe way to renew your air filter's performance
Dissolves dirt and grime without harming filter glues
Easy to use: spray on cleaner, wash off, and then re-oil your filter

3704-0044*Air filter cleaner, 20 fl. oz.

GAUZE-TYPE AIR FILTER OIL
Formulated especially for gauze-type filters
Stops dirt, sand and moisture
Blue color confirms uniform application and will not stain filter

3610-0013*Air filter oil, 20 fl. oz.

AIR FILTER CLEANER AND OIL KIT
Combination air filter cleaner and gauze-type air filter oil in one box
Spray cleaner on, wash off and re-oil filter

3704-0045*Air filter cleaner/oil kit

CUSTOM 120-SPOKE LACED FRONT WHEEL ASSEMBLY
High-quality American-made wheel assembly
Billet chromed custom aluminum hub
Polished stainless steel spokes with custom smooth nipples
Bearings, seals and center spacer are included but not installed, allowing you to set bearing end play to your specifications and use your preferred wheel-bearing grease
DOT approved and trued to less than .005" runout

0203-0185*21" x 3" front wheel assembly for 00-06 FXST, FXDWG

CUSTOM 120-SPOKE LACED WIDE REAR WHEEL ASSEMBLIES
High-quality American-made wheel assemblies
Billet chromed custom aluminum hubs
Polished stainless steel spokes with custom smooth nipples
Bearings, seals and center spacer are included but not installed, allowing you to set bearing end play to your specifications and use your preferred wheel-bearing grease
DOT approved and trued to less than .005" runout

0204-0193*18" X 8.5" rear wheel (for use with 9.625" hub and 3/4" axle), for 00-06 Custom applications
0204-0194*18" x 5.5" rear wheel (for use with 6.373" hub and 3/4" axle) for 00-06 FXST, FXDWG

EXTENDED GAS TANK FOR XL
Higher capacity (approximately 4 gallon) 2" extended tank
Mounts to stock location, requires use of a 04-06 XL Custom seat or equivalent nose shape
Accepts a 22mm petcock and late-style screw-in cap (sold separately)

0701-0098*For 04-06 XL

BUFFALO BARS
The ultimate 1 1/4" diameter handlebar, designed for maximum comfort
Drilled for internal wires; work with standard controls
Brilliantly show-chromed
Made in the U.S.A.
OEM-style handlebar clamps are not designed for use with these handlebars

0601-0304*Road King style bars
0601-0305*Beach bars

CUSTOM REPLACEMENT FRONT FENDER
Heavy-gauge steel construction
Inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork
Come un-drilled (unless noted) so you can position them to look and work best for your application
Handmade in the U.S.A.

1401-0139*6.5" wide, for 94-06 Road Glides and Road Kings

IRON CROSS HEADLIGHT ASSEMBLY
One-of-a-kind chrome headlight that gives just the right touch of Òold schoolÓ styling
Includes a 1" wire harness, plug and H4 55/60W halogen bulb
Features a universal bottom mount block
Measures 6 3/4" x 6 3/4"
Adapter will extend the light out for more versatility and better fit
DOT approved

MILLENNIUM HEADLIGHT ASSEMBLY
Designed especially for use with Independent Cycle Lowlife and Hardlife frames
Made of 16-gauge steel; TIG welded and hand finished
Features sleek, contoured glass with H-9 and H-11 halogen bulbs
Universal 5/8" block-type mount allows for fitment to most custom applications
Housing has a raw finish; ready for paint or chrome

2001-0150*Millennium headlight assembly

HIGH-PERFORMANCE CLUTCH KITS
Specifically designed to provide extended clutch life, fade- and slip-free operation and superior shifting
Friction plates have our exclusive high-heat friction materials for fade-free performance
More durable than OEM plates
Steel clutch plates won't expand; do not fade or promote clutch swell
Long lasting - up to 300% more life than stock plates
Will not muddy or contaminate oil

1131-0279* Friction plate kit for 98-06 Big Twin; repl. OEM #37932-98
1131-0280*Friction plate kit for 90-97 Big Twin; repl. OEM #s 37911-90, 37910-90
1131-0281*Friction plate kit for L84-89 Big Twin; repl. OEM #s 37931-84/37-930-84A
1131-0282*Friction plate kit for 68-E84 Big Twin; repl. OEM #37930-68
1131-0283*Friction plate kit for 41-67 Big Twin; repl. OEM #37930-41
1131-0284*Steel plate kit for 98-06 Big Twin; repl. OEM #37913-98
1131-0285*Steel plate kit for 90-97 Big Twin; repl. OEM #s 37913-90/37975-90
1131-0286*Steel plate kit for L84-89 Big Twin; repl. OEM #37975-84A
1131-0287*Steel plate kit for 68-E84 Big Twin; repl. OEM #37975-41 (w/o buffer)
1131-0288*Steel plate kit for 41-67 Big Twin; repl. OEM # 37975-41 (w/o buffer)
1131-0280*Friction plate kit for 91-06 XL; repl. OEM #37911-90
1131-0289*Friction plate kit for 84-90 XL; repl. OEM #36788-84
1131-0290*Friction plate kit for 71-E84 XL; repl. OEM #37985-71
1131-0291*Friction plate kit for 57-70 XL; repl. OEM #s 37985-52A, 37985-57
1131-0285*Steel plate kit for 91-06 XL; repl, OEM #37913-90
1131-0292*Steel plate kit for 84-90 XL; repl. OEM #36787-84
1131-0293*Steel plate kit for 71-E84 XL; repl. OEM #37992-71
1131-0294*Steel plate kit for 57-70 XL; repl. OEM #37992-52

GEAR SET CASSETTE
Includes all the gears and the shifting mechanism, assembled in an S&S polished trap door
May be installed in stock and most aftermarket
transmission cases with only minor modifications
Stock cases must be clearanced for the additional
shifting fork
Can also retro fit to 86-90 models with the appropriate late style clutch and starter adapter
Made in the U.S.A.

1103-0007*For 91-06 Softail, 91-05 Dyna Glide/FXR models