| DRAG
SPECIALTIES |
| MAINSTREET” HYDRAULIC
CLUTCH KITS
• Offer very smooth feel and consistent operation
• 40% easier to operate than cable systems
• Designed to complement early and late OEM brake reservoirs
• Engineered and manufactured by Magura in Germany
• Easy to install; step-by-step instructions included
• Kits are sealed with fluid and pre-bled
• 56” (nonadjustable) length version fits most applications
• 80” versions offer an adjustable length for custom applications
• Available in black or chrome finish
• Require using OEM or aftermarket clamp half
0612-0036*Chrome finish
Mainstreet clutch kit, 56” length
for 86-05 XL
0612-0037*Chrome finish Mainstreet clutch kit, 80” length,
for 86-05 XL
0612-0038*Black finish Mainstreet clutch kit, 80” length,
for 87-05 Big Twin models
0612-0039*Chrome finish Mainstreet clutch kit, 80” length,
for 87-05 Big Twin models


|
IGNITION SWITCH
• Marine-grade ignition/starter switch for added water and vibration
resistance
• Off/on/start(with return to run), works just like an automotive
ignition
• Chrome billet retaining nut holds the switch firmly in place
2106-0016*Ignition switch
|
| PARTS
UNLIMITED |
MUD FLAPS
• Durable 1/8” rubber for long life
• Feature chrome nickel studs with Maltese cross or skull design
• Available in medium (6 ?” H x 9 ?” W) or large (8” H
x 10 ?” W) sizes
1420-0004*Medium mud flap w/ Maltese cross studs
1420-0006*Medium mud flap w/ skull studs
1420-0005*Large mud flap w/ Maltese cross studs
1420-0007*Large mud flap w/ skull studs

|
| ACCUTRONIX |
REAR FOOTPEG MOUNTS
• Chrome billet footpeg mounts allow you to replace the rear floorboards
on 99-05 FLT/FLHT models with any male mount standard footpegs
• Hardware included
• Sold in pairs
• Made in the U.S.A.
1620-0107*Rear footpeg mounts for 99-05 FLT/FLHT

|
| MARTIN
BROTHERS |
SLICKSTAS EXHAUST SYSTEM
• Stepped header 1.75”-2”-2.25” design for added
back pressure and performance
• Frame mounted design, fits Softail and most custom applications
with Evolution or Twin Cam motor
• Show chrome finish
• Includes all necessary mounting brackets and hardware
1800-0133*Slickstas exhaust system

|
WTF EXHAUST SYSTEM
• The name says it all
• Twisted design with performance in mind; stepped header from
1.75”– 2”-2.25”
• Frame mounted design, fits Softail and most custom applications
with Evolution or Twin Cam motor
• All necessary mounting brackets and hardware included
1800-0135*WTF exhaust system
1861-0098*Heat shields for WTF exhaust system

|
MEDUSTAS EXHAUST SYSTEM
• Cool, twisted design that makes power
• Stepped 1.75”-2” stepped header design
• Transmission mounted, fits Softail and most custom
applications with Evolution or Twin Cam motor
• Show chrome finish
• All necessary mounting brackets and hardware included
1800-0134*Medustas exhaust system
1861-0097*Heat shields for Medustas exhaust system

|
TRENDKILLS EXHAUST SYSTEM
• Designed and named after Joe Martin’s “Trendkill” chopper
• Shorties have awesome curves and incredible sound
• Stepped 1.75”-2”-2.25” header design
• Transmission mounted, fits stock H-D® Softail with Evolution
or Twin Cam motor
• Show chrome finish
• All necessary mounting brackets and hardware included
1800-0138*Trendkills exhaust system

|
DAISYCUTTER EXHAUST SYSTEMS
• The baddest turndown systems on the market – they sound
like the bomb!
• Stepped header design, starts at 1.75” and grows to 2.25” dia.
• Transmission mounted, fits Softail and most custom applications
with Evolution or Twin Cam motor
• Also available for Dyna FXD models
• Show chrome finish
• All necessary mounting hardware included
1800-0136*Daisycutter exhaust system for Softail and
custom applications w/ Evolution or Twin Cam motor
1800-0137*Daisycutter exhaust system for Dyna FXD models
1861-0099*Heat shields for Daisycutter exhaust system

|
| JAGG |
OIL COOLER
• Cooler oil makes engines last longer — simple as that!
• Jagg oil coolers feature cutting-edge technology to keep your
engine cool under the most punishing conditions
• And because they’re designed to look as good as they perform,
they’ll perfectly complement your bike’s style
• Unique inline airflow orientation of the ten-row high-performance
cooler capitalizes on the low pressure created by the integrated
airfoil to draw air “inside-out” through the oil cooler
• Replacement oil cooler cores also available; perfect for direct
replacement as well as for custom builders
• Multipass oil flow configuration ensures the oil’s utilization
of the entire oil cooler
• Specially designed turbulators in each oil passageway gently
stir oil, exposing it to more critical heat dissipation surface
area for superior cooling with minimal increase in oil pressure
restriction
• Highly concentrated mini-louvered air fins allow maximum heat
transfer
• Made in the U.S.A.
0713-0025*Black horizontal-mount oil cooler for 00-05 Softail
models
|
| SOETENGA
DESIGN |
FOOTPEGS
• Machined from 6061 aluminum
• Polished, chrome-plated finish
• Fit most stock female mounts
• Sold in pairs
1620-0074*Brass knuckle footpegs
1620-0075*Dice footpegs
1620-0076*Skull footpegs

|
| GMA
ENGINEERING |
REAR BELT PULLEYS
• Polished, CNC-machined billet 70-tooth pulleys with chrome outer
ring
• Features ducted fan design to assist cooling and match GMA wheels
and rotors
• Available for 1 1/2” or 1 1/8” belt widths
• Made in the U.S.A.
1201-0065*70-tooth,
1 ?” belt width pulley for 84-99 Big
Twin
1201-0066*70-tooth, 1 1/8” belt width pulley for 84-99 Big
Twin
1201-0067*70-tooth, 1 1/8” belt width pulley for 00-05 Softail
|
| ARLEN
NESS |
EYEBALL
BILLET HEADLIGHT
• Super-bright single beam design with unique modern styling
• Made from beautifully chrome-plated billet aluminum
• Designed to work with most bottom mount applications
• Includes an H3 55W bulb
• Headlight housing measures 4 1/2” in diameter x 8” L;
lens measures 2 1/2” in diameter
• Not intended for highway use; extended mounting block not included
2001-0094*Eyeball billet headlight

|
| 2
WHEEL TUNES |
SNAP
AND TURN CHROME TURN SIGNAL GRILLES WITH LENSES
• The easiest way to rev up turn signals
• Patent pending design allows two-second installation with a simple
snap and turn
• Will work with any OEM flat “Deuce style” turn
signals; also works with Titan, Swift and Big Dog turn signals
• Available in red and amber
• Sold in pairs
2020-0083*Red ,Tribal Flame
2020-0100*Amber, Tribal Flame
2020-0084*Red, Spider
2020-0101*Amber, Spider
2020-0085*Red, Maltese Cross
2020-0102*Amber, Maltese Cross
2020-0086*Red, Flame
2020-0103*Amber, Flame
2020-0087*Red, Old School
2020-0104*Amber, Old School
2020-0088*Red, Biohazard
2020-0105*Amber, Biohazard

|
| RUSS
WERNIMONT DESIGNS |
CUSTOM REAR FENDER
• Heavy-gauge steel construction
• Each fender is inspected personally by a master fender builder
to assure straightness, consistency and a flawless finish with
an absolute minimum of finishing bodywork
• Fenders come undrilled so you can position them to look and work
best for your application
• Handmade in the U.S.A.
1410-0110*2000R left-side drive rear fender for use w/ rigid
frames

|
41MM ANGLE-CUT BILLET
LOWER LEGS
• Chrome legs with peaked bottoms
• Angle-cut fork boots match RWD triple trees
• Fender mounts accept 84-99 FXST/FXDWG style fenders
• Includes 3/4” hidden axle
• For use with 84-99 single-disc calipers
• Bushings and seals are not included
• Made in the U.S.A.
0403-0006*41mm angle-cut billet lower fork legs

|