STARTERS FOR SPORTSTER®
• 1.4kW black is a new replacement unit for stock and slightly modified engines
• 1.4kW chrome is same as above but with a chrome finish
• For 81-03 Sportster
• Made in Canada

80-1009*1.4kW black starter
80-1010*1.4kW chrome starter

CUSTOM BATTERY CABLE KITS
• Build custom-length cables for an exact fit
• Each kit contains the following: 25’ cable (1), 1/4” terminals (20), 3/8” terminals (8), 5/16” terminals (12), black heat shrink (40) and red heat shrink (12)
• Using 12” cables as an example, this 25’ custom cable kit will make 27 cables (a 12” cable uses 11” of cable and 2 terminal ends), for a substantial savings over precut lengths
• Available in clear, black and red
• Made in the U.S.A.

79-3303*Clear cable kit
79-3303-1*Translucent black cable kit
79-3303-2*Translucent red cable ki

CUT-DOWN HANDLEBAR MASTER CYLINDER
• Chrome die-cast aluminum construction
• Cut down by .256” for a lower profile
• Includes chrome mounting clamp with brake lever

1914-4001*11/16” master cylinder bore for 96-03 dual-disc applications
1914-4012*9/16” master cylinder bore for 96-03 single-disc applications
1914-4013*5/8” master cylinder bore for 84-95 single-disc applications

ONE-PIECE GAS TANKS FOR
FUEL-INJECTED 00-03 SOFTAIL
• 5.1-gal. tanks are made from 16-gauge stamped steel
• Available in standard or 2” extended lengths
• Dash-style tanks have mounting provisions for stock-style dash and ignition switch (not included)
• Tanks with fuel gauge bungs accept OEM-style or aftermarket fuel gauges
• Tanks for fuel-injection models use stock fuel pump1914-1860*Dash style tank with dual screw-in fuel caps
1914-1861*Dash style tank with fuel-gauge bung and single screw-in fuel cap
1914-1863*2” extended dash-style fuel tank with dual screw-in fuel caps
1914-1864*2” extended dash-style fuel tank with fuel gauge-bung and single screw-in fuel cap

CHROME DESIGNER FLOORBOARDS
• Great-looking custom floorboards available in two unique styles
• CNC-machined from aluminum
• Installation hardware included
• Fit 86-03 FLST, 80-03 FLT, FLHT and FLHR models
• Sold in pairs

7807-0023*Flame floorboards
7807-0024*Infinity floorboards

FLOORBOARD SKIRTS
• Give the stock floorboards a custom look
• Highly polished chrome-plated steel skirts cover the lower section of the floorboard
• Easy to install; mount between the rubber isolators and the upper floorboard
• Include instructions for easy installation
• Sold in pairs

1904-3001*Floorboards for 66-84 FLH models
1904-3002*Floorboards for 80-03 FLT, 86-03 FLST, 90-03

REPLACEMENT HEAT SHIELDS FOR PYTHON® STAGGERED DUALS EXHAUST SYSTEMS
• Give your pipes a new look without replacing the entire system
• Available for front and rear applications
• Sold each

7808-4001*Replacement front heat shield for DS-210449
7808-4002*Replacement rear heat shield for DS-210449
7808-4003*Replacement front heat shield for DS-210448
7808-4004*Replacement rear heat shield for DS-210448

SEAT PAN
• Constructed of ABS plastic
• Allows you to trim seat pan to conform to your custom parts
• Has all mounting hardware already installed
• Made in the U.S.A.

7808-1049*Two-up seat pan for Rolling Thunder Softail frames (approx. 14 1/4” W x 27” L)

MOTORCYCLE REPAIR MANUAL FOR 99-03 TWIN CAM 88
• Every Haynes manual is based on a complete tear down and step-by-step rebuild
• Manual covers everything from a complete engine rebuild to changing an oil filter

HM2478*Repair manual for 99-03 Twin Cam 88

BAREBACKS®
• Allow instant removal of your saddlebags
• Remove both the saddlebags and the steel mounting bracket
• FXD, FXST and FLSTF applications are for OEM saddlebags
• All components are made from high-quality 303 stainless steel
• Chrome-plated BareBacks caps cover male end of snap when you take off saddlebags; sold separately
• U.S. Patent #6,293,450-B1

7807-0036*BareBacks for 03 FLSTF/FXST/FXSTS
7807-0037*BareBacks for 03 FLSTF/FXST/FXSTS with detachable sissy bar
7807-0038*BareBacks for 03 FLSTC/FLSTS
7807-0039*BareBacks for 03 FLSTC/FLSTS with detachable sissy bar
7807-0040*BareBacks for 86-99 FLSTC
7807-0041*BareBacks for 86-99 FLSTC with detachable sissy bar
0706-0000*BareBacks for 91-03 FXD, 93-03 FXDWG, 90-02 FLSTF and 84-02 FXST
0706-0001*BareBacks for 91-03 FXD, 93-03 FXDWG, 90-02 FLSTF and 84-02 FXST with detachable sissy bar
0706-0002*BareBacks caps for all BareBacks (except DS-110705)
DS-110705*BareBacks for most throw-over saddlebag support brackets
DS-111708*BareBacks caps for DS-110705

PORKER II PIPES
• 1 3/4” pipes with 2 1/4” full-coverage heat shields
• Louvered baffles and mounting hardware included
• Fit 86-03 FXST/FLST

7805-0010*Classic low Porker II pipes
7805-0011*Turn-down Porker II pipes

EXTRA-PLATE CARBONITE CLUTCH PLATE KITS
• Friction plates use a proprietary carbon-based material capable of withstanding high temperatures and high-torque applications
• Have a higher coefficient of friction than anything on the market today
• Steel plates receive a performance-enhancing melonite nitrite treatment for better engagement, longer life and cooler running
• Each kit contains one extra fiber plate and one extra steel plate
• Extra plates increase clutch pack surface area
• Made in the U.S.A.

DS-223410*Kit for 98-03 Big Twin
DS-223441*Kit for 90-97 Big Twin and 91-03 XL
DS-223412*Kit for 84-89 Big Twin
DS-223413*Kit for 41-83 Big Twin

SHOCK ABSORBERS FOR SOFTAIL®
• Feature superior engineering, construction and materials to produce the best-quality shock absorber available for your Softail®
• Shock bodies are precision-drawn steel for strength
• Springs are chrome silicone construction
• Completely rebuildable for years of peak suspension performance
• Softail shock length is adjustable—shocks may be lengthened up to 12mm (approximately 1/2”) to lower the height of the bike
• OEM-style spring preload adjustment
• External adjusters for compression and rebound damping allow a wide range of settings for optimal suspension performance
• Available with your choice of three anodized spring cover colors
• Sold in pairs

OHHD203*Shocks with gold-anodized spring covers
OHHD204*Shocks with clear-anodized spring covers
OHHD205*Shocks with black-anodized spring covers

LED TAILLIGHT/TURN SIGNAL/LICENSE PLATE KIT
• Chromed-aluminum license plate assembly with a weld-in bucket
• Features LED taillight and turn signals
• Uses OEM plugs or can be spliced into existing wire harness
• Includes mounting hardware and template
• Fits 9” through 11” fenders

1905-0003*LED taillight/turn signal/license plate kit